Episode #3 of the Frugal Model Railroaders

We just dropped our third episode of the Frugal Model Railroaders, check us out where ever you get your podcasts!

Refining Plainfield (or going down the rabbit hole!)

Trying to model an era that is nearly 70 years ago can be difficult at times. I posted several photos over the last week and have figured out they are not all helpful. In the photo below is a fire that wiped out the original grain and feed store located just east of the station. 

It was later rebuilt as a shorter building with fewer windows and sliding freight doors as seen below.

This is much different than the original structure seen below along with the original freight house.

Going back to the photo of the "new" grain dealer, here are some details I have picked out.

The first shows a window and an edge of a door frame that I am assuming is a normal door to enter the office. There is also a platform and I again am assuming has a set of trair to get to the door. I would think this is the office or retail store section of the structure. 

This next photo shows the freight doors the the very short platforms just under each door. It also shows the very small windows along the top of the wall.

Here is an aerial view that shows that shows the number of platforms along the left (west) side of the building. It appears to have 5 platforms plus 1 on the east side. The photo is from 1965.

The portion on the bottom of the image is a separate building and is Modi's appliance and furniture store. I posted the only photo I can find of it on Wednesday. 

I am going to make some assumptions that there are at least four or five freight doors on each side of the building and basically make a the long walls a mirror image of each other. I am also assuming that the fright doors on the east side do not have platforms and truck wood just back up the building. I will just build mock ups in the short term to determine what size I should make the building. Using the measuring device on the Historical Aerials web site the building measures roughly 243' by 67'.  I will need to compress it's size to have it fit the room I have.  If anyone has any photos of this structure or the area in general I would love to see them.  

Happy Modeling!

Wordless Wednesday

 

Working on Plainfield

Now that I have torn out all of Norwich, I need to start building Plainfield. One note is I plan on having three staging tracks on the back of the benchwork to serve as the northern end staging. The staging will be hidden by a short (around one foot high) removable back drop. Below you can see the interlocking diagram of the small yard and station area of Plainfield.

The N&W line run from the south on the lower left hand side and goes up to the upper right. The photo blow is a shot of the are looking north. It is from near the end of the NH in the late 1960's.  The original wood fright station burned down and was replaced by a smaller cinder block station seen below. 

The next shot is much older, shows The grain and feed store, I believe it will become an Eastern States Farmers Exchange dealer and then and Agway. It is the structure to the right of the station in the photo above.

Below is my layout of the area. The white paper structure is the cinder block fright house and the grey structure will be the grain and feed dealer. It is Edison Lab budling that is a reasonable stand in for the structure.

This is the other end of the small yard. There was an engine stationed here during my 1958 modeling period, typically an RS-1. It would handle the local switching as well as the line heading west toward Willimantic, CT.

Moving further north, the topography is a bit more hilly, I am using a bridge to divide the scenes a bit.

Here is the American Standard plant located north of Plainfield. In reality it is situated 90 degrees from how I have it, but there is no room to lay it out that way. This was a new customer to the New Haven in the late 1950s. The Magic Pans Bakery kit from Walthers is the basis if the kitbash.

Here is the actual plant in recent years, it is now a Staples warehouse.

The photo below shows the siding leading to the building, it split in to two tracks near the building. The track is at 90 degree angle from the main line.

I plan on laying out the 3 staging tracks on some thing plywood, then laying on the track of the benchwork. This will be keeping busy for a while.

PODCAST

My friend Brian Johnson and myself have decide to produce a podcast, the Frugal Model Railroaders. So far we have dropped two episodes with a goal of one per month.  

The website is: The Frugal Model Railroaders where we will post when we drop new episodes and photos and notes related to the podcast. I have listed the site on the blog list to on the right hand side of my site.

Redo

I have made changes to my layout plan and moved the modeled portion of the Norwich and Worcester north. Instead of Norwich being the southern end of the layout, I am now making Plainfield CT the southern point of the layout. One of the main reasons I have done this is my version of Norwich was highly freelanced. By moving it to Plainfield, I am able to create a much more accurate model of the area. Here are some photos of my now removed Norwich:

https://norwichandworcester.blogspot.com/2017/02/norwich.html

Here are some shots of the changes.

Here is all the track, roadbed and structured removed. 

Another Shot of the bare foam

I took off the foam as well.

Another shot, please ignore the messy work bench.

Here is some plywood laid down. The portion to
the left will be trimmed down to blend in with
the more narrow section over my work bench.

I was able to save most of the track and turnouts as well as structures. The road bed and and foam was destroyed in the process of removing. I will go into more detail in the near future on the new plans.

North Shore Model Railroad Club Open House