Tuesday, May 21, 2024

 NEW ENGLAND/NORTHEAST

RAILROAD PROTOTYPE MODELERS MEET

IN ASSOCIATION WITH THE AMHERST RAILWAY SOCIETY

MARK YOUR CALENDARS FOR THIS YEAR’S EVENT:

MAY 31- JUNE 2, 2024 I !

THANK YOU ALL FOR MAKING OUR 2023 MEET A GREAT SUCCESS!

THANKS TO ALL WHO ATTENDED, VENDORS, MANUFACTURERS, AND PRESENTERS FOR HELPING US HAVE AN EXTREMELY SUCCESSFUL 20TH ANNUAL MEET IN 2023.  WE HOPE WE WILL SEE YOU AT OUR NEXT MEET IN 2024, IN SPRINGFIELD, MA.

Please check this site for and our Facebook page for updates.

Great door prizes and a chance to see some fantastic model work!

Bring some models and your friends!

Here is a link to the website:

https://nerpm.org/


This is my favorite model train event of the year.  It is a great opportunity to learn, exchange ideas, meet up with old friends and make new ones. 

Thursday, February 29, 2024

With a Little Help From My Friends

This hobby is great for making friends. Many have similar interests but are much more into research and have access to to information that you may never know existed. I have one such friend when it comes to passenger cars, trains and how they all work together. On one train I am modeling, the Bar Harbor Express, an over night train with sleepers from Washington DC, Philadelphia and NYC, going to Ellsworth, Maine, where passengers could be bused (or limousined) to Bar Harbor for vacation. Below is the consist for the summer only train from 1957.


There are three 10-6 sleepers listed on each train, and the New Haven did not have any so I had always figured they were PRR cars. I have collected three of the Walthers undecorated kits with out the skirting to model these sleepers. I also have one decorated with skirts. Then last summer my friend informs me that there is paper work showing the use of both Atlantic Coast Line and Florida East Coast cars on the train. This surprised me, but it really should not. Both of these southern roads are busiest in the winter with northerners escaping to the sun and fun of Florida. They end up being surplus in the summer months. I started looking on how to model these cars. Walthers has made the correct cars for both roads so it was a matter of tracking down out of production cars. Embay and train shows seemed the best route, but another friend of mine happened to have two ACL cars in his stash he was willing to sell me. know unfortunately we have no paper work stating what cars from either road were used, so I was happy with any. The cars my friend had are former C&O cars the ACL purchased in 1950 to bolster it's fleet of 10-6 cars. These cars had the 6 double bedrooms located in the center of the car for a superior ride in those rooms. The only work I have done on the cars is to add handrails in the aisle, window shades and a few passengers. Plus car names.






Being able to model some different cars breaks up the appearance of trains and leads to some interesting conversations. I am still on the look out for a Florida East Coast 10-6!

Wednesday, February 7, 2024

Watch Hill

 I have finally finished my New Haven observation. Watch Hill. I have worked on and off on this project so long, carbon dating may be the most accurate way to measure time. I had at one time one of the observations made by SOHO, but I was never happy with it, the logo panels were over size and the fluting was awful among other things. I did paint it and ended up selling it on eBay and shipping to Denmark of all places. This project is what I like to call a multi media kit. Here is an incomplete list of parts:

Brass cars side by Concord Jct.

Core kit by Eastern Car works. The kit included an extra section of roof ad floor to spice into the normal roof and floor to create the observation end. 

41-BNO trucks from Train Station Products with Branchline wheel sets.

Roof Vents and under body details by Custom finishing plus additional underbody details from Eastern Car works.

Couplers from Kadee.

Strip Styrene and clear plastic from Evergreen.

Diaphragms from IHC and American Limited.  (different ones on each end)

Red paint is Testors Hemi Orange

Mica Silver and flat black from Tamiya.

Decals from Micoscale.

The interior was 3D printed from a friend who will reman nameless to protect the guilty. 

The 3D printed interior glued to the core floor. 

I painted the interior with common craft paints.

A friend asked me how my project was doing and I said,
almost done, just have to put it together!

Here it the basic under body detail.  Rapido has me beat. 

This would have been the way to watch the crew races on the Thames.  
Just waiting to add the sides.

Here is my car next to a Rapido Coach

Drone view.

Vestibule End.

The other end.

The non bar side of the car

Serving drinks mid-train

The bar (money making) side of the car

I did send photos to Rapido telling them it is safe to start planning a run of these car snow that I have completed mine. 




Wednesday, December 6, 2023

Vintage Brass

Unlike vintage wine, vintage brass does not always age well. Models we thought that were "perfect" back in the 1970's and 1980's have many errors and/or lack detail of todays brass and plastic models. That being said, there are some useful models out there, especially passenger cars, that are just not available in plastic. Modern brass passenger cars are works of art, but can cost upwards of $800 per car.

First up is the Nickel Plate RPO. This is a model of a NYO&W car, but is useful for New England modelers as it can be used by NH, B&M and perhaps MEC and BAR modelers. The box just says RPO so you have to take a closer look. 



Other then being an RPO (and not even a full RPO) not much info about the car.


As you can see it is a 30' Apt RPO/baggage car.


The underframe is a very sparse, a battery box, a generator and air tanks.  No brake gear or center sill detail whatso ever. It does include trucks that seem to roll ok.  


Next up is a brass kit. For a while NJ International produced brass passenger car kits for a variety of Pullman Standard lightweight cars. I would stay away from the fluted side kits as the fluting is awful. I picked up a 13 double bedroom car for use on the Bar Harbor Express. I got lucky finding a nicely built one. Normally the come as a formed body shell made up of the sides and roof, stamped ends a floor with center sill, bolsters and detail parts of grab irons and roof vents. No underframe detail included. The model I purchased came with trucks, but the cars normally do not.









Not bad looking cars, with some work they will fill a roll on my railroad. The nice part is the two cars totaled less then $90. These cars would be major kitbashes and would still coat at least the same as the brass models. I will go into detail on detailing and painting these models in future blog postings.























Tuesday, December 5, 2023

Clover Glade

I finished up Clover Glade and I an not very happy with it.  I will never attempt using a Bachmann Pullman as a core kit.  I had issues with the roof and the sides lining up the way I wanted. I ended up using the ordinal Bachmann roof which is not the correct roof. In the future I will stay with Branchline as my cores. I will use it for now and add it to the redo list down the line. 



It will be fine in my Bar Harbor Express, which I am down to needing only to finish up a coupe of cars.  We will talk about those next time.  I am off to more projects, happy modeling.

Wednesday, November 22, 2023

Visting Bob Murph's Fantatstic New Haven Raiload Layout.

Back in September in conjunction with the New Haven Railroad Historical and Technical Association annual reunion, I had the opportunity to visit Bob Murphy's beautifully done model railroad. The layout is operated based on the Norwich and Worchester line of the NHRR, but is scenery in a more generic New England, just using real location names. This is not a criticism as the layout looks fatalistic, operates flawlessly and is very comfortable.  The last is an odd statement, but the aisles are wide, there is carpet on the floor. the sound equipped locomotive are not too loud, making it a nice place to just sit at watch the trains go buy and visit with fellow molders. I am just going to show a bunch of phots to show of his great work.

 























Bob was also a most gracious host, I hope to have more opportunities to visit his layout.